If you're shopping for new tires for your Honda CR-V or just checking whether the ones on your vehicle are correct you’ll need the Honda CR-V stock tire size specification chart. It’s not a fancy document. It’s a straightforward list of the factory-approved tire dimensions for each model year and trim. Getting this right matters because mismatched sizes can affect speedometer accuracy, handling, fuel economy, and even warranty coverage.

What does “Honda CR-V stock tire size specification chart” actually mean?

It’s a reference table showing the original equipment (OE) tire size, wheel diameter, width, and offset that Honda installed on each CR-V generation from the 2002 model through the current 2024 version. For example, a 2018 CR-V EX-L typically came with 235/60R18 tires on 18-inch alloy wheels. That number breaks down like this: 235 = tread width in millimeters, 60 = aspect ratio (sidewall height as a % of width), R = radial construction, 18 = wheel diameter in inches. You can learn more about what each part means in our guide on what the stock tire size number means for a 2005 CR-V.

When do people look up the Honda CR-V stock tire size specification chart?

Most often when replacing worn tires, upgrading wheels, or verifying a used vehicle’s setup. A common scenario: you buy a 2012 CR-V with aftermarket 17-inch wheels and aren’t sure if the 225/65R17 tires currently mounted match Honda’s original spec. Or maybe you’re comparing trims like the LX vs. Touring and want to know why one has 17-inch wheels and another has 19-inch. The chart helps you confirm what was installed from the factory, not what someone added later.

Why the 2005 CR-V is a frequent reference point

The 2005 model year sits at a transition point: it was the last of the second-generation CR-Vs and the first to offer optional 16-inch alloy wheels (with 215/70R16 tires) alongside the base steel wheels. Some owners mistakenly assume all 2005 models used the same size but trim level and options mattered. If you own a 2005 CR-V and are planning replacements, it helps to review the specifics in our article on replacing stock tires on a 2005 Honda CR-V.

Common mistakes people make with stock tire sizes

  • Assuming all CR-Vs from the same year use identical tires even base and top trims often differ by width, aspect ratio, or rim size.
  • Using the door jamb sticker as the only source without cross-checking against the owner’s manual or Honda’s official parts catalog (some stickers list optional sizes, not just OE).
  • Swapping to a tire with a significantly different overall diameter like going from 225/65R17 to 235/55R18 without recalibrating the TPMS or checking clearance, which can cause rubbing or ABS errors.

Where to find the official Honda CR-V stock tire size specification chart

Honda publishes OE specs in two reliable places: the vehicle’s owner’s manual (usually in the “Tires” or “Specifications” section), and the Tire Placard on the driver’s side door jamb. For quick comparison across years, our Honda CR-V stock tire size specification chart page pulls verified data from Honda service manuals and parts bulletins organized by generation and trim, not just year.

Real-world tip: Don’t ignore load index and speed rating

The stock tire size number alone isn’t enough. A 235/60R18 tire could have a load index of 103 (875 kg) or 107 (975 kg) and Honda specifies which one applies. Using a lower load index than OE may void warranty coverage in some cases. Speed rating (e.g., H, V, or T) also affects ride comfort and responsiveness. Always match both the size and the full alphanumeric code shown on the sidewall of your original tires.

Before ordering new tires, write down your current tire’s full sidewall marking (e.g., 235/60R18 103V), confirm it matches your CR-V’s generation and trim using the official chart, and double-check wheel width and offset compatibility especially if you’re changing rims. If in doubt, ask a Honda-certified technician to verify fitment rather than relying solely on online calculators.